Best 7 Electric Skateboard

Electric Skateboard

Electric Skateboard is a sports equipment used for skateboarding.  It is a small piece of wooden board carrying the shape of a surfboard with flour wheels attached to it.  It consists of three parts that are, deck, truck and the wheel. The deck is the actual board. It is the plane wooden surface on which rider balances himself and rides.  The truck is the component which is usually made of metal that holds the wheels to the deck. An average deck is 32 inches in length, 8 inch in width and is a little less than 0.5 inch thick.  The nose and tail of the deck is defined and it is concave in the idle. The wheels of a skateboard are made of polyurethane. All the skateboard might be close to same in appearance, or when it comes to their designs and shapes but the characteristics of the skateboard vary which entirely depends upon the use of the skateboard.  Some skateboards are specifically built for speed, slalom and freestyle

Skateboards mainly are of two types- long board and short board.  A skateboard should also be concave in the middle to carry out stunts and different tricks.  Long boards are usually faster, they are mostly used for cruising and racing while short boards can be used to do various tricks and can be ride it in skate parks.

Electric Skateboard

How electric skateboard is different from other skateboards?

An electric skateboard is basically a motorized skateboard which is convenient, more faster and more progressive.  The speed of the electric skateboard is usually controlled by a hand held remote. In some cases, it gains the movement by shifting of the body weight of the rider from one place to the other.  For forward motion, body weight shifting is between front of the board, and rear for brake. If you want to change the direction of the travel, tilt either it to the right or to the left by adjusting the skateboard towards the desired direction.  Electric skateboard should not be considered vehicle, consequently to ride an electric skateboard the rider needs no licence or registration. They usually weigh around 10kgs and have top speed between 15-50km/hr.

Electric skateboard is also referred as e-board or e-skateboard.  Since it is driven by an electric motor, it can accelerate and brake independently, which is the major difference between a normal skateboard and an electric skateboard.

It contains various components, and all these components can be distinjuished in three cateogories:

  1. Basic Components

  2. Mechanical Components

  3. Electrical Components

BASIC COMPONENTS

  1. Deck

This is the platform of the rider and the biggest part of the electric skateboard.  It is usually made out of wood, maple plywood is preferred the most. In some decks, a layer of fiberglass or carbon is used which gives them more strength and rigidity.  If the deck is made up of fiberglass or carbon, it will be lighter, durable and stronger. Although a wooden deck is always a favorite. The underside of the deck is usually printed or painted as the choice of a customer or sometimes it is also left blank and the it’s upto the customer how creative they can be. The decks have different shapes such as freeride, cruiser, downhill.

Read: Best 7 Skateboard Decks

  1. Truck

The truck are the axis of an electric skateboard.  They are made out of metal and have two main functions. The first function is to transfer the body weight from deck to the bearings and wheels.  Another function is that help in turns. They are one of the most essential part of skateboard.

  1. Wheels

The main function of the wheel is to transfer the weight from the trucks to the pavement.  They are made of polyurethane. They come in variety of shapes, sizes and colors according to the skating and boarding.  Wheels with larger diameter roll faster, accelerate slowly and move more easily over cracks. Wheels with smaller diameter keep the board close to ground requiring less force to accelerate.

  1. Ball Bearings

They are usually made of steel or sometimes out of silicon-nitride.  They are the ones responsible for perfect rolling of the wheels. Each wheel is mounted with the help of two bearings.  Bearings need regular cleaning and lubrication. A complete ball bearing cleaning and maintaining comes in market. The maintanence of the bearing is necessary.

  1. Grip Tape

It normally comes in black color, although various other colors are available in the market.  It is applied to the top surface of a board to allow rider to stay on board when he is accelerating, braking or doing turns or tricks.   It helps to transfer all the feet movement to the deck.

MECHANICAL  COMPONENTS

Motor is one of the most important parts of an electric skateboard and it is why electric skateboard is so convenient to ride.  

  1. HUB  MOTOR

This is placed directly inside the wheel.  It works quietly and looks stealthy. Due to its placement, hub motor is exposed t concussions.  Though being a motor it will be producing considerable amount of heat but as it is caged and not ventilated, it takes much time in cooling. Due to this reason, it has holes in motor-casing which does no t make it water resistant.

  1. BELT MOTOR

This is classic and conservative motor.  In this, an electric motor drives the motor pulley, which is connected to the wheel pulley through the belt.  Belt motor is exposed to the air, hence it gets cooled easily. Consequently, it doesn’t require holes and is water resistant. 

ELECTRIC  COMPONENTS

  1. Battery

The function of the battery is to supply power to the motor and it is referred as the energy storage device in the system.  Battery is the heaviest component in an electric skateboard. The most common battery in an electric skateboard is Lithium-ion battery.  Battery comes in various shapes, varieties and chemistry.

  1. ELECTRONIC  SPEED CONTROLLER (ECS)

This is referred as the brain of the entire system.  It is connected to the battery and decides the inputs for the battery.  ECS connects to the battery, motor and Bluetooth receiver. It also has got a computer for data processing. 

  1. REMOTE  CONTROL

They are the devices used for acceleration or applying the brakes.  These remote controls come in variety, some are slideable or some come in form of trigger button.

  1. BLUETOOTH  TRANSMITTER  AND RECEIVER

These are wireless and very convenient.  The Bluetooth transmitter is located inside the controller and from here it sends signals to Bluetooth receiver, allowing a wireless communication between remote control and the skateboard.

ADDITIONAL  COMPONENTS

  1. LIGHTS

They raise the safety bar of an electric skateboard, as they make rider visible on road.  White LED light is generally used for front and red LED light is used at the back.

  1. NOSE  GUARD

They protect the nose of an electric skateboard from any kind of damage.  They are made out of plastic and come in variety of shape and color.

  1. EXTRA  BATTERY

Majority of skateboards come with a single battery, so it is advisable to carry an extra battery for longer rides.  It keeps the ride uninterrupted and smooth.

  1. WHEEL  GUARD

The wheel of the skateboards are protected if wheel guard is there.  From all the outside elements like dirt, dust , water etc. that can damage the wheel, these wheel guard protect them.

ADDITIONAL  COMPONENTS

  1. LIGHTS

They raise the safety bar of an electric skateboard, as they make rider visible on road.  White LED light is generally used for front and red LED light is used at the back.

  1. NOSE  GUARD

They protect the nose of an electric skateboard from any kind of damage.  They are made out of plastic and come in variety of shape and color.

  1. EXTRA  BATTERY

Majority of skateboards come with a single battery, so it is advisable to carry an extra battery for longer rides.  It keeps the ride uninterrupted and smooth.

  1. WHEEL  GUARD

The wheel of the skateboards are protected if wheel guard is there.  From all the outside elements like dirt, dust , water etc. that can damage the wheel, these wheel guard protect them.

PROS  OF AN ELECTRIC SKATEBOARD

  1. Easy to learn as they can be adjusted and come with three different levels, learner, standard and expert mode.
  2. The handheld wireless control or the remote control enable a smooth ride and the ride needs no physical push.
  3. Regenerated power enable smooth run to the system.
  4. The electric skateboards have the capacity of achieving top speeds of 25mph on a level ground.
  5. They are 100% eco-friendly as they do not cause any pollution.
  6. They can either be battery operated or can be manual, depending on the choice of the user.

CONS  OF AN ELECTRIC  SKATEBOARD

  1. WEIGHT

They are heavier than the usual skateboards.  As they consists of inbuilt battery, brake pads and motors,  all this makes them heavy. Stunts cannot be performed on this.

  1. WEIGHT  CAPACITY  OF THE RIDER

Although all types of people enjoy the ride on these electric skateboards but people with less weight are at advantage, for can easily manage the ride with no or minimal balance issue and they can still be creative with the skateboard owing to less weight.  Also, when a heavy person rides the skateboard, it demands more power and battery can drain easily.

BEST  ELECTRIC  SKATEBOARDS

  1. BOOSTED  STEALTH

  • Excellent performance
  • Top speed is 24mph
  • Extended range 14 miles
  • Super Flex Composite Deck
  1. Boosted  Mini X
  • Powerful and agile
  • Top speed is 20mph
  • Extended range 14 miles
  • Deep Dish Composite Deck
  1. Boosted  Plus
  • Classic and trendy
  • Top speed is 22mph
  • Super Flex Composite Deck
  • Extended range is 14 miles
  1. Boosted Mini S
  • Small and mighty
  • Top speed is 18mph
  • Standard range 7 miles
  • Deep Dish Composite Deck
  1. SWAGTRON 66242-2 SWAG  BOARD NG-1 MOTORIZED ELECTRIC SKATEBOARD
  • Strong and durable
  • Effortless Rolling
  • Chargeable battery
  • Built with battery manager system
  • LED remote
  1. RAZOR ELECTRIC  SKATEBOARD
  • Speeds up to 10mph
  • Can be continuously used for 40 minutes
  • Uncompromising quality
  • Digital remote control
  • Reverse kingpin trucks for enhanced stability
  1. SWAGTRON  SWAGBOARD T882 EVO  HOVERBOARD WITH LED LIGHT-UP WHEELS
  • Dynamic LED wheel light add to color and style
  • Robust dual 250w motors
  • Efficient and stable battery
  • Sturdy, durable and ready to roll

While riding the electric skateboards, safety should be always in mind.  As they are convenient but faster than the traditional skateboards, we must be cautious while riding.  Selection of the right electric skateboard should be done keeping all necessary factors in mind. Before starting the ride, check all about the electric skateboard.

HAVE A HAPPY AND SAFE RIDE!

>